Shirt Pocket Discussions  
    Home netTunes launchTunes SuperDuper! Buy Now Support Discussions About Shirt Pocket    

Go Back   Shirt Pocket Discussions > SuperDuper! > General

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 09-06-2005, 10:38 AM
ChetA ChetA is offline
Registered User
 
Join Date: Sep 2005
Location: Franklin, MA
Posts: 7
Failure creating ASR compliant DMG in 10.2.8

I am planning to upgrade my eMac 800Mh Power PC G4 (ver 2.1) to Tiger from OS X 10.2.8. My internal Macintosh HD drive is a 55.89 GB (1K = 1024) with 16.28 GB used. I have an external Firewire hard drive with 3 partitions of 10GB, 20GB and 202GB. I tried to make a "Backup - all files" to a disk image on the largest partition and it failed with the following error:

|10:55:43 PM|Info| Elapsed Time: 36m 26.422s
|10:55:43 PM|Info| (1 task, weight 100)
|10:55:43 PM|Info| File size: 17306919424 bytes, Checksum: CRC32 $F1047198
|10:55:43 PM|Info| Sectors processed: 34318336, 33802577 copied
|10:55:43 PM|Info| Speed: 7.5Mbytes/sec
|10:55:43 PM|Info| Savings: 1.5%
|10:55:43 PM|Info| created: MacHD OS X 10.2 Backup 2.dmg
|10:55:43 PM|Info| ......COMMAND => Pre-scanning /Volumes/Vol3/MacHD Backup 2/MacHD OS X 10.2 Backup 2.dmg to support fast block copy restore
|11:33:20 PM|Info| /usr/bin/hdiutil: detach: "disk2s1" detached successfully.
|11:33:20 PM|Info| /usr/bin/hdiutil: detach: "disk2s2" detached successfully.
|11:33:20 PM|Info| /usr/bin/hdiutil: detach: "disk2" detached successfully.
|11:33:20 PM|Info| asr: unable to unflatten "/Volumes/Vol3/MacHD Backup 2/MacHD OS X 10.2 Backup 2.dmg" - %s.
|11:33:20 PM|Info| asr: unable to write UDIF info into "/Volumes/Vol3/MacHD Backup 2/MacHD OS X 10.2 Backup 2.dmg" - 78. Function not implemented.
|11:33:20 PM|Info| asr: image scan failed - Function not implemented.
|11:33:20 PM|Error| ****FAILED****: result=256 errno=0 (Undefined error: 0)

The disk image that was created takes 16.11GB of disk space. The disk being used still has 140GB of free space even with the disk image in place. The disk image appears to have been created successfully; it mounts in the Finder and I can access it. I have a couple of questions. (I can provide a copy of the entire log of the run by email if that would be of use to you.)

Do you think the problem is related to running 10.2.8 or do you think there is a problem with the copy of 10.2.8 that I am running?

Would it be possible to still restore the system to a disk using disk copy followed by other steps such as blessing the system folders? If so, how does one bless a OS X system folder?

The full log of this run is in the SuperDuper! log 2.txt upload attached to the “Problem getting apps to run on clone volume” posting made this morning.
Reply With Quote
  #2  
Old 09-06-2005, 11:03 AM
dnanian's Avatar
dnanian dnanian is offline
Administrator
 
Join Date: Apr 2001
Location: Weston, MA
Posts: 14,923
Send a message via AIM to dnanian
This looks to me like your install of Jaguar is damaged, Chet -- almost like you have a mismatched disk imaging framework.

What I'd do, if you need to create an image, is to use a sparse image instead. See this FAQ for more info.
__________________
--Dave Nanian
Reply With Quote
  #3  
Old 09-06-2005, 01:20 PM
ChetA ChetA is offline
Registered User
 
Join Date: Sep 2005
Location: Franklin, MA
Posts: 7
I will try your suggestion. Thanks.

Dave,
Thanks for the prompt reply. I will take your advice and try using a sparse image as you suggest.

I really like your program. That's what prompted me to try using a disk image backup as well as a clone. I decided to try to create a second "independent" backup for safety's sake. (Of course, it isn't really independent since both backups are on the same physical device.) But it won't be a big deal if I can't get a second back up anyway.

Thanks again.
Chet Armstrong
Reply With Quote
  #4  
Old 09-06-2005, 01:29 PM
dnanian's Avatar
dnanian dnanian is offline
Administrator
 
Join Date: Apr 2001
Location: Weston, MA
Posts: 14,923
Send a message via AIM to dnanian
Thanks very much, Chet -- I'm glad you like it, and hope you'll tell some friends, too!
__________________
--Dave Nanian
Reply With Quote
  #5  
Old 09-08-2005, 12:46 PM
ChetA ChetA is offline
Registered User
 
Join Date: Sep 2005
Location: Franklin, MA
Posts: 7
Manual creation of sparse image worked

Hi Dave,
I tried your suggestion and I was able to create a sparse image backup.

The only trick was that you have to use Disk Copy on OS X 10.2 and you have to set Disk Copy to expert-mode to get to choose the sparse image format. Fortunately we were able to find the method of doing that described on a web site.

Just in case someone else reading the thread needs to do this, you set DiskCopy to expert mode in OS X 10.2 using the Terminal command:

defaults write com.apple.DiskCopy expert-mode 1

You can exit from expert-mode (if you wish) using the command:

defaults delete com.apple.DiskCopy expert-mode

Thanks again for you help.
Chet Armstrong
Reply With Quote
  #6  
Old 09-08-2005, 01:19 PM
dnanian's Avatar
dnanian dnanian is offline
Administrator
 
Join Date: Apr 2001
Location: Weston, MA
Posts: 14,923
Send a message via AIM to dnanian
Ah, interesting. It's been so long since I've been on Jaguar I didn't realize that their Disk Utility didn't provide for this directly.

Thanks for providing your instructions: I hope they benefit other users as well!
__________________
--Dave Nanian
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OS X Server 10.2.8 amowrey General 5 01-22-2006 11:02 PM


All times are GMT -4. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.