Shirt Pocket Discussions  
    Home netTunes launchTunes SuperDuper! Buy Now Support Discussions About Shirt Pocket    

Go Back   Shirt Pocket Discussions > SuperDuper! > General

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-05-2007, 09:14 PM
aaron aaron is offline
Registered User
 
Join Date: Feb 2007
Posts: 2
Backup -- internally connected! -- won't boot!

Thus may not be a SuperDuper! problem but, if it isn't, somebody here may be able to suggest something anyway.

I am using a G4 Dual 867 MDD.

I made a full copy of my old 60G startup drive with 10.4.8 on it to an 80G partition on my recently-acquired 300G Western Digital drive. Everything seemed to go OK, including making the drive bootable (according to SuperDuper!). The drive (all 3 partitions) is totally readable and writable with no problems. When I boot from another startup disk with 10.4.6, its Startup Disk panel lets me choose the new copy of 10.4.8 as my startup volume.

However, when I try to boot from this new volume, connected to either the built-in ATA-66 bus or an ATT-133 bus on my Sonnet Tempo card, the computer freezes immediately when the white screen with the apple should show up, showing a white screen with a slased circle instead. (Sometimes, depending on factors I'm not sure about, it just boots from the 10.4.6 volume instead!)

I also tried unsucessfully to boot from 9.2.2 on the new volume. The fact that this failed convinced me that it wasn't a problem with the system but something else on the disk, so I examined all 5 of my connected disks with both pdisk and Disk Utility 10.5.5. With pdisk, I got the message, pdisk: No valid block 1 on '/dev/rdisk1' for only that one disk, which I could confirm (via Disk Utility) was the Western Digital disk. Also via Disk Utility, I found out that this one disk has no OS 9 drivers. (I think I chose that deliberately, if unwisely, when I formatted the WD drive.)

Since I didn't use pdisk to examine the Western Digital disk in the month or two I had the disk before making the backup, I have no way of knowing if the missing block 1 was missing before I made the backup. Anyway, I'd like to find out if there's any way to correct the problem now, other than finding another disk or volume that I can clone to!

Last edited by aaron; 02-05-2007 at 09:18 PM. Reason: to improve formatting
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Boot off firewire backup leem General 7 01-20-2007 11:21 AM
Fw Drive Wont Boot Budgie General 3 11-05-2006 01:22 PM
Undersized disk image and a Boot Camp-related backup question garybollocks General 3 10-23-2006 01:07 PM
Source HD won't boot after canceled Backup enderws General 3 03-04-2006 04:02 PM
Backup won't boot dgough General 5 08-16-2005 06:04 PM


All times are GMT -4. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.