[ssmith]

Hello -

I am trying to create a image for lab deployment using your product and am experiencing the following problem:

At the end of the process the app fails. The log reports the following:

"|04:50:01 PM|Info| PHASE: Conclude Target Setup
|04:50:01 PM|Info| ...ACTION: Finalizing "tiger.dmg" session
|04:50:01 PM|Info| ......COMMAND => Unmounting /Volumes/SSDATA HD/tiger.dmg from /tmp/SVUmount
|04:50:03 PM|Info| "disk3" failed to unmount (0x0000C001)
|04:54:46 PM|Error| rm: /tmp/SVUmount: Device busy
|04:54:46 PM|Info| ......COMMAND => Con|04:50:01 PM|Info| PHASE: Conclude Target Setup
|04:50:01 PM|Info| ...ACTION: Finalizing "tiger.dmg" session
|04:50:01 PM|Info| ......COMMAND => Unmounting /Volumes/SSDATA HD/tiger.dmg from /tmp/SVUmount
|04:50:03 PM|Info| "disk3" failed to unmount (0x0000C001)
|04:54:46 PM|Error| rm: /tmp/SVUmount: Device busy
|04:54:46 PM|Info| ......COMMAND => Converting /Volumes/SSDATA HD/tiger.dmg to UDRO formatverting /Volumes/SSDATA HD/tiger.dmg to UDRO format

I then have a sparse image. I am creating the image from an emac with Tiger installed booted into target mode. Any advice?

Thanks,

ssmith