View Single Post
Old 07-20-2009, 09:47 AM
billmcaninch billmcaninch is offline
Registered User
Join Date: Jul 2009
Posts: 2
Can't Copy to HD

I'm very new to the Mac environment and this is my first try at using SuperDuper!. Here's the situation. I have a MacBook, 10.5.7, (I'll call it Mac 1) all set up as I would like it and would like to make a second MacBook (Mac 2) identical to the first.

From what I've read I came up with the following procedure:
1. I start Mac 1 in Target Disk Mode.
2. I start Mac 2 and connect Mac 2 to Mac 1 with a firewire cable.
3. The Mac 1 target disk icon appears on the Mac 2 desktop.
4. Using Applications on the Mac 1 target disk I open SuperDuper!
5. In the SuperDuper! "Copy" window I select the Mac 1 hard disk.
6. In the Superduper! "to" window I try to select the Mac 2 hard disk BUT here's where I run into the problem--Mac 2's hard disk is grayed out and cannot be selected.

I'm obviously doing something very basically wrong but can't figure out what. Any help would be appreciated. I have six new MacBooks that I have to deploy.

Last edited by billmcaninch; 07-20-2009 at 09:50 AM.
Reply With Quote