Shirt Pocket Discussions

Shirt Pocket Discussions (
-   General (
-   -   Moving from G4 to G5 and upgrading to Tiger (

Mumrik 05-13-2005 07:11 PM

Moving from G4 to G5 and upgrading to Tiger
Until now my main working machine has been a PowerMac G4 with MacOS X 10.3.x. I have now got the chance to upgrade to a PowerMac G5 (2*1.8 GHz, not the just released model). I would like to take this opportunity to "kill two birds with one stone", transfering all my stuff from the G4 to the G5 and installing Tiger on the G5. I presume SuperDuper! can help me making this a smooth transition. But how?

Should I upgrade to Tiger on the G4, then make a full backup of it to an external FW drive using SuperDuper and then "restore" that backup onto the G5? I fear this migh not be a good idea since I believe the Tiger installation for the G5 is different in some respects from the one I would have on the G4 (right?)

So, is there another way which I guess will have to start with Tiger installed on the G5 and then transferring the non-Tiger stuff from the G4 to the G5. How would I best do this? What's the risk of it being incomplete and requiring a lot of "tweaking"?

Thanks for advice on this operation which I guess is not all that uncommon.

dnanian 05-13-2005 08:28 PM

Hi, Mumrik.

As much as I'd like to tell you to use SuperDuper! for this, I think you'd be better off simply installing Tiger on the G5 and using its built-in Migration Assistant to transfer the data from the old machine.

Basically, you'll set your G4 into FireWire Target Disk mode, connect the two machines with a FireWire cable, and the Assistant will do the rest.

If that doesn't work well for you, we can talk about how to do it with SuperDuper! -- but this'll save you $20, and I think you'll be pleased with the result.

Mumrik 05-14-2005 07:18 AM

Thanks for advice
Thanks a lot for prompt and clear advice pointing me to the Migration Asssitant which I had otherwise probably overlooked. I'm sure the US$ 20 investment I have already made in SuperDuper is far from wasted since I'm going to use it for Backup and Security Clones. Thanks for a very useful program and for 1:st class support!

Best regards / Mumrik

dnanian 05-14-2005 09:50 AM

My pleasure, Mumrik!

All times are GMT -4. The time now is 12:15 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.