Shirt Pocket Discussions

Shirt Pocket Discussions (
-   General (
-   -   Backup a currently existing MBP drive to a fresh drive with SD? (

montag 05-22-2008 11:59 AM

Backup a currently existing MBP drive to a fresh drive with SD?
Here's the situation: a new hard drive is coming in the mail for my Macbook Pro. It's also coming with an external enclosure, and my plan is to swap out the old hard drive, use it as a little USB-powered drive inside the enclosure, and install the new, larger one into the MBP.

I'd like to copy the contents of my 100 GB old hard drive (Leopard) to the new 200 GB one. Normally, I'd just restore from my Time Machine backup, but that happens to be across the country for the moment.

I've been wracking my brain trying to figure out how to do this swap before I have access to my TM backup again. Here are a couple solutions I thought of, and I wanted to know if SD could handle it.

1) Attach the 200 GB drive via the enclosure to my MBP. Do a restore of the current hard drive to the 200 GB drive. Swap hard drives. Boot normally.

2) Swap the hard drives, boot from the 100 GB in the enclosure (unlikely), and do the same thing.

3) Find a Leopard install disk. Swap the drives. Install Leopard on the 200 GB. Boot to fresh Leopard, install SD, and restore from the 100 GB attached to the enclosure to the 200 GB in the MBP. (Don't think this is possible, since I shouldn't be able to restore to a drive I'm currently running.)

Worst-case scenario, I can just wait until I head back and have access to my TM backup or a large external to do a SD backup. (There's always purchasing one, using it for a backup, and returning it the same day.) However, I'd love to know if any of my ideas are possible with SD or if you have any other ideas.

Here's the hardware, since I know chipset and other factors of the external drive affect bootability:
- Nippon Labs EN-25SATA 2.5" USB 2.0 External Enclosure
- Seagate Momentus 7200.2 ST9200420AS 200GB 7200 RPM SATA 3.0Gb/s Notebook Hard Drive
- Current MBP drive: Fujitsu MHV2100BH 100GB Notebook Hard Drive

dnanian 05-22-2008 12:06 PM

Swap the drive. Put the new drive in the USB case. Clean install Leopard to the new drive. When prompted to "copy from another Mac", point at the USB drive that has your stuff on it. It'll brin git in.

montag 05-22-2008 12:30 PM

Thanks for the quick response. (Really quick, wow.) Sounds like a great solution. However, I'm a little confused about the terminology (new drive, etc). The new drive is the 200 GB one, which will obviously come blank. The old drive is a 100 GB drive, which has my Leopard install on it. Should I have the 100 GB or the 200 GB in the USB drive?

montag 05-22-2008 12:46 PM

As another option, is it possible to use Disk Utility's Restore function to copy the old drive to the new drive? The workflow would be...

1) Take the 100 GB drive out, attach to USB.
2) Put the 200 GB drive in.
3) Start up from Leopard disk.
4) Select Disk Utility -> Restore.
5) Point Source to 100 GB on USB, and Destination to 200 GB in MBP

dnanian 05-22-2008 02:03 PM

You'd put the 100 in the USB case and the new 200 in the computer. Clean install to the new drive, etc.

All times are GMT -4. The time now is 01:39 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.